IQOO Z6 5G PD2165F Flash File (official Firmware)

The IQOO Z6 5G PD2165F Flash file is currently available for download at It can be used to fix problems like a stuck logo, a bricked device, device upgrades and downgrades, and other software issues. Download the entire flash file from the link below and read the complete flashing instructions before proceeding.

About IQOO Z6 5G PD2165F

The IQOO Z6 5G is equipped with Qualcomm’s latest Snapdragon 695 5G chip. It has 4GB of RAM in total. The non-removable 5000mAh battery on the IQOO Z6 5G supports rapid charging at 18W. The IQOO Z6 5G has 128GB of internal storage and runs Funtouch OS 12, which is based on Android 11. There is no dedicated SD card port for expanding the storage capacity of the device.

IQOO Z6 5G PD2165F Flash File (official Firmware)

Name: PD2165F_EX_A_12.0.8.20.W30.V000L1_vivo_qcom
Size: 4.5 GB
Password: officialroms
Driver: Qualcomm USB Driver


Instructions for flashing the IQOO Z6 5G PD2165F:

The following tools should be used to flash this device: AF Tool, QPST Tool.

  • On your computer, you must download and install the Qualcomm driver.
  • You can skip this step if you already have Qualcomm’s latest drivers installed on your computer.
  • Download and extract the Flash file.
  • The QPST Flash Tool is available for download, installation, and use.
  • In EDL mode, shorten EDL points to the connected phone.
  • Add a port to the QPST tool.
  • Click “Load XML” after selecting rawprogram unsparse.xml from the stock rom folder.
  • Click “Load Patch” after selecting patch0.xml from the default rom folder.
  • Wait for the flash to finish before clicking the Download button.

Read Also

Leave a Comment