Vivo Y33T PD2142F Flash File (New Stock ROM)

by

You can use this flash file to fix hang on logo, boot loop, dead problem, Auto FASTBOOT mode and recovery mode, and other software issues on the PD2142F Vivo Y33T. Always use the most recent version of the flash file and read all of the flashing instructions before flashing the Vivo Y33T. From the links provided below, you can download the entire flash file, as well as the flash tool and drivers.

The Vivo Y33T is a smartphone manufactured by Vivo.

Vivo’s Y33T PD2142F is a smartphone that was released in 2022.

The Vivo Y21T is powered by the Qualcomm Snapdragon 680 4G 6nm chipset. It has 8GB of RAM in total. The Vivo Y21T has a 5000mAh non-removable battery that supports 18W rapid charging. Funtouch OS, which is based on Android 11, runs on the Vivo Y21T. It comes with 128GB of internal storage and an SD card slot for additional storage.

Download Vivo Y33T PD2142F Flash File (New Stock ROM)

Name Download Link
PD2142F_EX_A_11.0.7.33.W30.V000L1_vivo_qcom One Drive || MediaFire
QPST Tool Click Here
AF Flash Tool Click Here
Qualcomm USB Driver Visit Here

Flashing Vivo Y33T PD2142F:

The following tools should be used to flash this device: QCFIRE, UNLOCKTOOL, EMT TOOL, MRT, QCFIRE.

On your computer, you should download and install the Qualcomm driver.

  • You can skip this step if you already have Qualcomm drivers installed on your computer.
  • Download and extract the Flash file.
  • The QPST Flash Tool is available for download, installation, and use.
  • To connect the phone in EDL mode, shorten the EDL points.
  • Add a port to the QPST Tool.
  • Click Load XML after selecting rawprogram unsparse.xml from the stock rom folder.
  • Click Load Patch after selecting patch0.xml from the default rom folder.
  • Wait for the flash to finish before clicking the download button.

Note: If your device is not connecting to your computer, use the link above to download and install the driver.

Read Also

Leave a Comment