Gionee F10 Flash File V05 , V06 Tested 100% Working

On The Post You Will Get Gionee F10 Flash File V05 , V06 Tested 100% Working : And This Firmware Flash File Is Working On All Spd Flash Tool This is a latest flash file and it works on all phones so if you want to flush your Gianni F10 then Download this flash file and load it on flash tool and connect the phone and flash it

 

If your phone is in dead mode, the logo hangs, or it is locked, flashing this file will repair all of the problems at once, and if you are locked with FRP, flashing will unlock it.

 

Download the Gionee Max Flash File from the link above and install the USB driver before flashing. Also, maintain the phone’s battery at least 30% charged.

Gionee F10 Flash File V05 , V06 Tested 100% Working

File Name – Gionee F10 Flash File Firmware Tested

File Size – 1.8GB

Flash Tool – Gionee Flash Tool

File Link –

Download

 

Gionee F10 Flashing Instructions

  • To begin, download the files listed above.
  • All files from a zip or rar file should be extracted.
  • Run UpgradeDownload.exe from the Itel flash tool folder.
  • After that, select a PAC file from the flash file folder and click the load packet button.
  • Allow some time for the file to load.
  • Then select “Download” from the drop-down menu.
  • Put the phone in download mode to connect it to the tool.
  • Turn off the phone and simultaneously push the volume up and down buttons, then plug in the data cable.
  • Flashing will begin when a certain amount of time has passed.
  • The data cable may not come out of the phone while flashing, or the phone may go into dead mode.

1 thought on “Gionee F10 Flash File V05 , V06 Tested 100% Working”

Leave a Comment