Motorola Moto C Plus XT1721 FRP File & Pattern Remove 2022

You can get the FRP file for the Motorola Moto C Plus XT1721 here. the manufacturer’s firmware ROM. The Motorola firmware file is the original, and it’s included in the scatter file that explains how to use SP FlashTool to flash and install drivers. The following instructions will show you how to flash a Motorola phone with a Scatter file. Instructions on how to flash are included in the manual.

Motorola Moto C Plus XT1721 FRP File & Pattern Remove 2022

Name Download Link
XT1721 FRP File & Pattern Unlock MediaFire || Onedrive
SP Flash_Tool v5.1736 Visit Here
MTK Usb Driver Click Here

FRP Bypass Motorola Moto C Plus XT1721:

  • Download the Motorola Moto C Plus XT1721 FRP File and Mediatek Driver.
  • In the SP flash tool, select the scatter file from the provided flash file.
  • Choose the above-mentioned formatting option.
  • Then, from the drop-down menu, select manual format flash.
  • Open the scatter file in the firmware folder by pressing control + F and looking for FRP.
  • Copy and paste “Begin address” and “format Length” into the manual option.
  • FRP CODE (Begin address 0x6a00000 and Format Length 0x100000)
  • Pattern Unlock Code (Begin Address 0xcd000000 and Format Length 0x60000000)
  • After that, press the Start Play button on the phone to connect it to your computer.

How to Unlock Motorola Moto C Plus:

Download and install the Mediatek driver for the Motorola Moto C Plus XT1721 first.

Then, before flashing, charge the phone to 30%.

  • To begin with, get all of the files listed above and save them to your computer.
  • Extract all of the files from the zip archive.
  • From the FlashTool folder, launch flashtool.exe.
  • Then open the tool and select a download agent from the download agent tab.
  • Next, select the MTK AllInOne DA.bin file from the FlashTool folder.
  • Select the scatter file from the flash file folder by clicking Select on the scatter-loading file tab.
  • From the drop-down menu, select “Download.”
  • Turn the phone off and connect it to the Flashtool after that.
  • Press the button and connect the data connection to the phone according to the phone’s boot mood.
  • The green check option will appear after the flashing is finished.

Read Also

Leave a Comment